How We Build and Check Our Tools
A size recommendation is only as good as the numbers behind it. This page explains exactly how Unit Size Guide works, so you can judge the results for yourself.
1. Item volumes from published cube sheets
Movers estimate a household by listing every item with a standard volume in cubic feet, on a form called a cube sheet or table of measurements. We use the allowances published by state regulators, mainly the household goods cube sheet of the Alaska Department of Public Safety and the table of measurements of the Washington Utilities and Transportation Commission. For example, a three-seat sofa counts as 50 cubic feet, a loveseat 35, a dining chair 5 and a full-size refrigerator 50.
Where those sheets don't give a figure, we use our own estimate, based on the editor's experience of loading storage units: queen, full and twin beds (60, 50 and 40 cubic feet with box spring and frame), dresser (30), chest of drawers (20), end table (5), crib (10), bicycle (10), push mower (15), patio table (15) and chair (5), and wardrobe box (10). Boxes count at their nominal size (1.5, 3, 4.5 and 6 cubic feet), and an 18-gallon tote at 2.4 cubic feet, since a U.S. gallon is 231 cubic inches.
2. Unit volume and the packing ratio
A unit's volume is width × depth × ceiling height. Most standard U.S. units have an 8-foot ceiling, as operators such as CubeSmart and SpareFoot state, so a 10x10 holds 800 cubic feet. You can't fill all of it: furniture is irregular, some pieces can't take weight on top, and you need a path. We assume you can fill 70% of the volume with typical packing, 60% if you keep an aisle and 80% if you stack tightly to the ceiling. These ratios are our working assumption from experience, not a published standard, and you can change them in every tool.
The recommended size is the smallest standard unit (5x5, 5x10, 5x15, 10x10, 10x15, 10x20, 10x25 or 10x30) whose volume covers your items divided by the packing ratio.
3. Automated tests
The calculations run on tested code. Tests check unit volumes against the figures operators publish (200 cubic feet for a 5x5, 800 for a 10x10, 2,400 for a 10x30), the volume sums, the size choice at the exact boundaries, and the totals quoted in our worked examples. If a test fails, the update is not published.
4. Human review
Every guide and tool is reviewed by our editor, Patrick Legallais, before publication and whenever it is updated. The "Updated" date on each page shows the last review. Software tools, including AI assistants, help us write code and drafts, but nothing is published without passing the tests above and a human review.
5. Limitations
Volumes are averages: an oversized sectional or a solid-wood armoire takes more room than its allowance. Facilities differ in exact dimensions, ceiling height and door size. Our results are planning estimates; always confirm the dimensions with the facility before you rent.
6. Independence
Unit Size Guide is free to use. It may later be funded by advertising and by commissions from clearly labeled partner links, such as storage marketplaces. Neither will ever change how a tool works or which size it recommends. Any partner link will be disclosed on the page where it appears.
Found an error?
Tell us at contact@unitsizeguide.com with the page, what you entered and the result you expected. We review every report and correct confirmed errors promptly.